Siemens Venting Hobs

Cooking and extraction in one

Siemens Venting Hobs
Request a Quote

Please fill out the information below to submit an enquiry.

A brief overview of Siemens Venting Hobs

Siemens venting hobs put an induction hob and a downdraft extractor into one worktop appliance. Steam and cooking smells are drawn down through the hob instead of rising to a hood. That suits an island or an open-plan kitchen, where a hood would interrupt the view across the room. The range covers the iQ300, iQ500 and iQ700 series in 60 cm, 70 cm and 80 cm widths. Every model has the same top extraction rate: 500 m³/h in normal use and 622 m³/h on boost.

The real differences are fan control and noise. iQ300 models have three fan speeds plus a booster, and their lowest setting is around 61 dB. iQ500 and iQ700 models have nine speeds, so the fan can run gently at around 41 to 42 dB while a sauce simmers. That's worth having if the kitchen is also where you eat and talk. Some iQ500 and iQ700 models are internet connected, but the iQ300 models are not. The hobs are listed for ducted extraction or recirculation. Ducting sends air outside, while recirculation filters it and returns it to the room, so it helps where an outside wall is out of reach.

Most finishes are black glass. There is also a Matt Edition iQ700, and an iQ700 InductionAir Plus model with a bevelled front and stainless steel side trims. Start with the width your worktop allows. Then decide whether quieter low speeds and finer fan control are worth stepping up from iQ300. To compare other cooking surfaces, browse all Siemens hobs or Siemens electric hobs, or see all Siemens products.