Please enter your postcode for available delivery and installation options
Based on postcode (change)
Please fill out the information below to submit an enquiry.
A guide to Franke Cooker Hoods
Franke cooker hoods cover the main ways of venting a kitchen: glass-and-steel chimney hoods for a wall above the hob, an island hood, flush-mounted under-cabinet units and a downdraft extractor. The range suits anyone who wants extraction that matches a stainless steel kitchen, whether the hob sits against a wall, under wall units or on an island.
The Franke chimney cooker hoods come in 60 cm and 90 cm widths and two glass styles: T-Glass, with a curved glass canopy, and T-Glass Linear, with flat glass for a cleaner, squarer look. Both have three speeds plus a booster for the steamiest moments. If your hob is in the middle of the room, the Franke island cooker hoods offer the flat-glass design in a 90 cm ceiling-hung version.
Where wall units sit above the hob, the Box EVO hoods fit flush underneath them, in 52 cm or 70 cm widths, so the hood all but disappears into the cabinetry. The Franke downdraft extractor is the most discreet option. It sits behind the hob, pulls steam down at the source and drops out of sight when you're not cooking. It also has four speeds plus a booster and runs quieter at its lowest settings. The hoods work in extraction or recirculation mode, so you can vent outside or filter the air back into the room if ducting isn't practical.
To narrow it down, start with where your hob sits, then match the hood width to your hob. For a wider look across the brand, browse all Franke products.